Air conditioning can only cool or heat Your cognition needs to be upgraded ~
It’s getting hot, and it’s time to turn on the air conditioner. But can you really use air conditioning? Is it only cooling in summer and heating in winter? Air-conditioning remote controllers are generally equipped with a variety of use modes, and different modes have different use effects. Let’s take a look at it.We have every reason to believe. solar air It will become the mainstream of the industry and will gradually affect more and more people. https://puremind.com/product-category/puremind-air-conditioner/solar-air-conditioner/
Cool feeling mode
Applicable people: afraid of heat and cold.
Blowing the air conditioner in summer is cool, because the room temperature is lowered, and because the cold air blown by the air conditioner blows on the body, it plays the role of an electric fan.
The principle of the “cool feeling” function is simple: control the angle and speed of the air outlet to prevent the air conditioner from blowing at people-the traditional way is to adjust the angle of the air deflector and the speed of the fan, and the new air conditioner is even equipped with an infrared probe to prevent the wind from blowing directly at people, which is very friendly to people who are afraid of cold stars.
Air supply mode
Applicable scenario: when it is not too hot
Air conditioning is a combination of “cooling/heating+fan”, and the “air supply” function is to turn on the fan instead of starting the compressor, electric heating wire and other temperature-related components of the air conditioning.
If you want to improve the air quality, breathe and smell, you need air conditioning with fresh air system.
Eco mode
Applicable scene: before going to sleep
”eco”, the abbreviation of economic, is also called “energy saving” mode.
It is suggested that the air conditioner can be changed to this mode before going to bed. When you fall asleep at a comfortable room temperature, the air conditioner will change the temperature, increasing it in summer and decreasing it in winter. In short, it will reduce the power consumption until it is completely turned off, that is, the “sleep” mode.
Dehumidification mode
Applicable scene: hot and humid weather
Both “dehumidification” and “refrigeration” modes will produce refrigeration effect. The difference is that after the “dehumidification” mode is turned on, the air conditioner will appropriately cool the indoor air, let the water vapor condense into water, and then discharge it to the outside-reducing the indoor humidity, and people’s body temperature will be cooler. The main purpose of the “refrigeration” mode is to reduce the indoor temperature, and the water vapor in the condensed air is an incidental effect.
From the effect point of view, after opening the “dehumidification” mode, although the air conditioning temperature is not very low and it does not consume too much electricity, it will be more comfortable.
It should be noted that this function is only effective in areas with humid climate. If you live in a dry area, this function is not recommended.
Automatic mode
Applicable people: people who need indoor constant temperature and people who use company air conditioning.
To choose this mode, you need to set a temperature first, say 26 degrees Celsius. If the room temperature is lower than 26 degrees Celsius, the air conditioner will start heating; If the room temperature is higher than 26 degrees Celsius, the air conditioner will start to cool.
Auxiliary heating mode
Applicable scene: when you just enter the house in winter and are about to be frozen.
There are two ways to heat by air conditioning. One is a porter who relies on heat-compressor. From the thermodynamic point of view, using compression mechanism to save heat and electricity, but the heating speed is slow, and when it is particularly cold outdoors, such as below 0 degrees Celsius, the heating efficiency will become low.
The other is the producer of heat-electric heating wire. “Auxiliary heating” is the option of turning on the electric heating wire, which can assist the compressor to achieve the effect of rapid heating. After the room temperature reaches the set temperature, just keep the temperature by the compression mechanism. At this time, the “auxiliary heating” function can be turned off in order to save electricity.
Everyone can use these functions as much as possible. After all, we spent thousands of dollars to buy an air conditioner, and if we don’t drain all its functions, we will lose money!